Solve questions on Networking

-

1. How many bits are in an IP address?

A. 16 bits
B. 32 bits
C. 64 bits
D. None of the above

Answer :- B.32 bits
2. What is the maximum value of each octet in an IP address?
A. 128
B. 255
C. 256
D. None of the above

Answer :- B. 255
3. How many bits are in a subnet mask?
A. 16 bits
B. 32 bits
C. 64 bits
D. None of the above

Answer :- B. 32 bits
4. A half-duplex circuit means
A. Only one side can talk at a time
B. The signal strength is cut in half
C. The signal strength is doubled
D. Two hosts can talk simultaneously

Answer :- A. Only one side can talk at a time
5. Attenuation means
A. Travel
B. Delay
C. A signal losing strength over distance
D. Loss of signal due to EMI

Answer :- C. A signal losing strength over distance
6. __________ means to convert binary data into a form that can travel on a physical communications link.
A. Encoding
B. Decoding
C. Encrypting
D. Decrypting

Answer :- A.Encoding
7. How many host addresses can be used in a Class C network?
A. 253
B. 254
C. 255
D. 256

Answer :- B. 254
8. What is the minimum number of bits that can be borrowed to form a subnet?
A. 1
B. 2
C. 4
D. None of the above

Answer :- B. 2
9. What is the primary reason for using subnets?
A. To reduce the size of the collision domain
B. To increase the number of host addresses
C. To reduce the size of the broadcast domain
D. None of the above

Answer :- C. To reduce the size of the broadcast domain
10.How many bits can be borrowed to create a subnet for a Class C network?
A. 2
B. 4
C. 6
D. None of the above

Answer :- C. 6

Comments

Post a Comment

Popular posts from this blog

Solve

-
Image
Directions: In each Q1 to Q3 of the following questions, there are five letter groups or words in each question. Four of these letter groups or words are alike in some way, while one is different. Find the one which is different. Q.1.    (1) black    (2) red    (3) green    (4) paint    (5) yellow Answer:- (4) paint Q.2.    (1) BC    (2) MN    (3) PQ    (4) XZ    (5) ST Answer :-(4)XZ Q.3.    (1) Mango    (2)Apple    (3) Orange    (4) Guava    (5) Rose Answer :- (5) Rose Directions : In each of the following questions, there is a question mark in which only one of the five alternatives given under the question satisfies the same relationship as is found between the two terms to the left of the sign :: given in the question. Find the correct answer ...
Read more

Solved practical slips of 12th Computer Science journal

-
Image
Program 1:- Write a function in C++ that exchanges data (passing by references )using swap function to interchange the given two numbers.*/ # include<iostream.h> # include<conio.h> void swap(float &x ,float &y) { float t=x; x=y; y=t; } void main() { void swap(float &,float &); float a,b; cin>>a>>b; cout<<” a := ” << a <<” b := ”<< b<< endl; swap(a,b); cout<< ”a:= ”<< a<< ” b := ”<< b<< endl; } Output : 2 4 a := 2 b:= 4 a:= 4 b: =2   Program 2:- Write a program in C++ with a ratio class using member functions like assign () function to initialize its member data integer numerator and denominator ,convert() function to convert the ratio into double, invert() to get the inverse of the ratio and print() function to print the ratio and its reciprocal.*/ ...
Read more

SOLVE QUESTION ANSWERS ON OPERATING SYSTEM .

-
1.One can interface with operating system by means of ------- A) Operating system call in a program B) Operating system commands C) Operating system process D) Both by operating system call and operating system commands Answer :-  D) Both by operating system call and operating system commands 2. Which of the following is not type of processing ? A) Serial B) Network C) Batch D) Multiprogramming Answer :- B) Network 3. Kernel is _____ A) A part of operating system B) An operating system C) A hardware D) A register Answer :-  A) A part of operating system 4. UNIX operating system is based on ______ A) Language structure B) Kernel approach C) Virtual machine D) Time sharing Answer :-   B) Kernel approach 5. A transition between two memory resident process in a memory resident process in amultiprograming system is called ______ A) Process switch B) Mode switch C) Transition switch D) None of these Answer :-    A) Process ...
Read more